Bosch Rexroth A2FM A10FE fixed displacement hydraulic motor for the Bonfiglioli Engineering Equipment DTBO09661 1T833021253 1T832951300
- Product Details
- Product Model
- FAQ
Bosch Rexroth A2FM: Bent-Axis Design
How it works
The A2FM uses a bent-axis axial piston design. The pistons sit at an angle to the drive shaft, and pressurized oil pushing on them produces torque through the shaft.
Why engineers choose it
High efficiency across a wide speed range, especially at high pressure
Strong starting torque, which suits heavy loads
Robust tapered roller bearings, which tolerate high radial and axial shaft loads
Wide size range, from small motors to very large frames
Typical use
Winches, travel drives, mixers, conveyor drives, and marine or offshore machinery where sustained load and high pressure matter.
Bosch Rexroth A10FE: Swashplate Plug-In Motor
How it works
The A10FE is an axial piston motor with a swashplate design, built as a plug-in unit. It is designed to bolt directly into a gearbox or housing and share that housing's lubrication.
Why engineers choose it
Compact, integrated packaging, because it plugs into the driven unit
Fewer external parts and leak points
Good fit for gearbox-integrated drives, where space is tight
Typical use
Compact travel drives and gearbox-mounted drives on mobile machines, where installation envelope is the main constraint.
Installation and Maintenance Tips
Fill and vent the case with clean oil before start-up to avoid dry running.
Filter aggressively. Contamination is the leading cause of premature piston motor failure, so aim for a cleanliness level the manufacturer specifies.
Watch case drain flow. A rising trend usually signals internal wear.
Monitor temperature. Oil that runs consistently hot degrades seals and shortens life.
Protect the shaft seal from pressure spikes and from excessive case pressure.
Common Mistakes to Avoid
1. Ordering by name alone without verifying series, size, and flange.
2. Ignoring case pressure limits.
3. Undersizing filtration.
4. Skipping a proper start-up procedure.
5. Assuming a motor from one Bonfiglioli gearbox fits another without checking the input interface.
For more brands and equipment models, please visit https://www.baolilaihydraulic.com/brand/
| Application equipment brands | Application equipment No. |
| Bonfiglioli | DTBO09661 |
| Bonfiglioli | 1T833021253 |
| Bonfiglioli | 1T832951300 |
Q1: Are A2FM and A10FE the same motor?
A1: No. They are separate product lines with different internal designs and mounting concepts. Choose based on your packaging and load requirements.
Q2: What causes premature failure?
A2: Mostly contamination, overheating, cavitation from poor inlet conditions, and pressure spikes.
Q3: What is the price and delivery time of the Rexroth A2FM/A10FE motor for Bonfiglioli Engineering Equipment?
A3: The specific price and delivery time will depend on the equipment model or specific product model you provide.
Q4: How do I purchase a Rexroth A2FM/A10FE motor for Bonfiglioli Engineering Equipment?
A4:You can visit https://www.baolilaihydraulic.com/contact/ to contact us and purchase our products through various methods.
