Rexroth A2FM bent axis hydraulic motor for the Claas Engineering Equipment 00846770 5030390 744222.0 1802001.1
- Product Details
- Product Model
- FAQ
The A2FM is a fixed-displacement axial piston motor in a bent-axis design, made by Bosch Rexroth. It converts hydraulic flow and pressure into rotary motion, delivering torque and speed to the shaft.
Why Bent Axis Motors Suit Claas Equipment
Agricultural and engineering machines share a demanding duty profile: dust, heat, vibration, varying loads, and long seasonal hours. The A2FM suits that profile for several reasons.
High Torque in a Compact Package
Space around drives on harvesters is tight. A fixed-displacement bent axis motor delivers a lot of torque for its size, which helps when a motor must be mounted close to a gearbox or belt drive.
Strong Efficiency Across the Range
Higher efficiency means less heat, and less heat means longer oil and seal life. That is useful during long days in hot fields.
Serviceability
Bent axis units are a mature, well-understood design. Parts, repair know-how, and exchange units are widely available, which keeps downtime short.
Installation Best Practices
Check the nameplate. Match the type code, displacement, flange, shaft, and port configuration exactly.
Fill the case with clean oil before first start, and make sure the case drain line routes to the tank without restriction.
Keep case pressure low. Excessive case pressure damages shaft seals.
Align the drive carefully. Misalignment and over-tensioned belts shorten bearing life.
Flush the system if you are replacing a failed unit, so debris from the old motor does not destroy the new one.
For more brands and equipment models, please visit https://www.baolilaihydraulic.com/brand/
| Application equipment brands | Application equipment No. |
| Claas | 00846770 |
| Claas | 5030390 |
| Claas | 744222.0 |
| Claas | 1802001.1 |
Q1: How do I know which A2FM my Claas machine uses?
A1: Read the nameplate on the motor and compare the type code with your Claas parts catalogue. Your dealer can also look it up by machine serial number.
Q2: What causes premature A2FM failure?
A2: Contaminated oil, overheating, cavitation from poor inlet conditions, and excessive shaft loading are the usual culprits.
Q3: What are the price and delivery time for the Rexroth A2FM motor for Claas Engineering Equipment?
A3: The specific price and delivery time will depend on the equipment model or specific product model you provide.
Q4: How do I purchase a Rexroth A2FM motor for Claas Engineering Equipment?
A4:You can visit https://www.baolilaihydraulic.com/contact/ to contact us and purchase our products through various methods.
